Dyson Ball Not Picking Up? Solved!

Dyson ball not picking up can result from many factors affecting your device, which will be addressed in this article. Read on to have a clear understanding of these causes. At some time, all vacuums and hoovers won’t pick up. You should do a few easy actions to ensure that a Dyson operates correctly. In theory, we should do these things regularly. 

If your Dyson ball not picking up, it may be that it’s not well plugged into the socket, it’s dirty, the switch is off, or some other obstructions. Try cleaning the roller and filters first to see if you can handle it yourself and save time and money before rushing your machine to a repair shop. 

How well these exact things can function will amaze you. You will learn the causes and how to repair this problem with the Dyson ball not picking up stated in the article below.

Dyson Ball Not Picking Up; Problem And How To Solve Them

Wrongful Plugging

The vacuum ball will not operate correctly if it is not correctly plugged into the socket. For this reason, it’s crucial to ensure the cord is fully inserted into the socket.

Tripped Fuse or Circuit Breaker

When first turned on, vacuums may consume a significant amount of electricity, so check to see if the outlet’s breaker hasn’t tripped. Push the reset button on the outlet if the breaker has tripped. Locate your circuit breaker panel; this is often found in the basement of most homes, and reset the outlet if it lacks a reset button.

The Switch Is Not Turned On

The issue may be resolved by ensuring the switch is on or off. If the switch is off, simply flipping it to “on” will fix the issue.

See also  Dyson DC33 Not Picking? Solved!

Reset Motor Thermostat 

Resetting the Motor Thermostat entails:

  • Change the power button’s setting to “O-Off.”
  • Shut off the vacuum.
  • Check to see if the hose or filter is clogged; if so, clear the hose and replace the filter.
  • After the vacuum has cooled for 45 minutes, connect it in.
  • Flip the power switch to the “I-On” position to start the vacuum.

Dust Bag Is Full

When vacuuming, there won’t be anywhere for the dirt to go if the dust bag is overflowing. Remove the dust bag and empty it to fix the issue. Continue reading for further suggestions to improve your vacuum ball if it still has trouble picking up after opening the dust bag.

Vacuum Airway Blocked/Damaged

If the vacuum ball is not picking up any dirt or debris, something might obstruct the airway. The intake opening behind the brush roll and the dust bag air duct are the two places where you can look for a blockage. Remove the dust bag from the vacuum and raise it upright to check for obstructions in the dust bag air duct. You can now unplug the super stretch hose and inspect the air duct beneath the dust bag for obstructions.

If not, search for a blockage next to the roller brush. Lay the vacuum down first. Next, look for obstructions in the opening behind the brush roll. If there is debris, carefully remove it from the opening by cutting it away with scissors.

Dirty Filters

Your vacuum ball may stop picking up if your foam filters haven’t been cleaned in the last month. Remove the dust bag and the two filters on top of the motor base to clean the foam and felt filters. Lukewarm water should be used to rinse the filters until the water is clear. Before reinstalling the filters in the vacuum, let them completely dry. You might need to change the filter if your vacuum still has trouble picking up.

Damaged Hose

A broken or decaying hose is one of the most frequent causes of the Dyson ball not picking up. The short hose between the main suction head and the base and the hose connecting the handle to the wand should be examined. These hoses deteriorate with time, beginning to peel and split. There could be little cracks in the hose that produce suction loss even if there isn’t a clear break. 

See also  Dyson DC25 Not Spinning? Answered!

Damaged Motor

Unfortunately, your motor is failing if none of the other fixes worked. A new engine typically costs as much as a vacuum and is difficult to replace. Perhaps it’s time to get a new vacuum.

Incorrect Vacuum Settings

The vacuum ball won’t work if it doesn’t understand that the ball should pick up. Ensure your vacuum is set to understand every minor detail of its duty. The ball won’t pick up if the vacuum isn’t set to this position.

Obstruction On The Ball

It’s possible that debris encircled the ball and prevented it from picking up. It is usual for debris to cause this. It’s simple to remedy this. Start by unplugging the vacuum. Next, without disassembling anything, carefully cut the debris. Use your fingers to remove anything. To reach the debris, you need to turn the ball manually. Continue until all the debris has been removed.

Uncompleted Nozzle Attachment

The nozzle must be attached entirely for the electricity to reach the ball. Even though the vacuum has suction, it’s possible that power isn’t getting to the ball. Press down on the handle when the vacuum head is on the floor to finish the connection. If you’re still having trouble, something might block the connection. After a moment, retry.

Hose Blockage

Pull the hose off by pulling on the two tabs at the bottom of the nozzle on the back. Verify that all debris is removed from the L-shaped plastic base and that nothing is clogged there, as that could lead to Dyson not picking up. Check the hose itself next. To check for a blockage, feel along with the hose. If there is a blockage, you should use a tool to remove it. Check the suction release valve at the hose handle if there isn’t a clog in the hose. On the valve, two arrows need to be fully moved to the right to stop the valve from moving.

The hose that connects to the vacuum’s base is another location to check for obstructions. Pull the hose from the ground, lean the vacuum to the floor, and look for blocks. Make sure nothing is in the way of the detachable side of the hose that connects to the vacuum’s main body.

See also  Dyson Not Sucking? Here's Why!

The tube on the vacuum’s main body is the last location to look for obstructions. To detach the tube from the main body, press the red button. Check the tube for obstructions.

Check Cyclone

Take the bin and press the grey bar at the top of the bin to unlock the latching cover if you can feel air flowing from the filter but not the hose base. The bin’s top component should be removed. Tap the top of the component over the trash can to gather the microscopic dirt particles in the base-level filter. Blow air over the top to release the fine particles if you can access compressed air (you can go to a gas station). Avoid blowing air into the cyclone test since moisture can encourage mold growth, which can lead to the Dyson ball not picking up.

How Long Is Dyson Balls’ Lifespan?

Dyson ball lifespan is around 7–10 years. Unique cyclonic technology and potent motors are available from this British company. Their impressive products and Dyson vacuum balls are predicted to last seven to ten years. A five-year warranty, for instance, is offered with the Dyson Ball Multi Floor Upright Vacuum.

What Distinguishes A Dyson Ball From A Dyson Animal Ball?

Despite having significantly different functionality, both versions have a similar design. For instance, the Dyson Animal has a 245 Air Watt suction power (AW). The Animal 2, on the other hand, has the highest level of suction of any Dyson upright vacuum with 306 AW.

Why Won’t My Dyson Ball Turn On?

Check for overheating because it can lead to Dyson ball not turning on. The majority of Dyson vacuums have an integrated safety function that turns the device off if it starts to overheat. Examine your filter to check whether it needs to be washed or if the machine is clogged.

Can Dyson Be Used On Hardwood?

Yes, Dyson can be used on hardwood. The Dyson Ball Multi Floor vacuum cleaner is designed for hardwood and carpeting, as its name implies. Whether the stairs are carpeted or not, you can clean them using its stair tool.

Conclusion On Dyson Ball Not Picking Up

It’s a known fact that vacuums help with our everyday house cleaning routine, making our work faster, and channeling less energy into it. It’s also true these vacuums work on their own as long as they are programmed for what they are to do, but that doesn’t stop you from caring for them. 

Dyson ball not picking up results from lack of maintenance can lead to numerous problems which can lead to total breakdown of these iRobots. In other words, maintaining these vacuums should also be our priority as it helps prolong their lifespan and enhance their functionality.