Dyson DC25 Not Picking Up? Avoid This!

Is your Dyson DC25 Not Picking Up? This problem can become frustrating, but how do you fix it? Keeping area rugs, carpets, and upholstered furniture clean is a snap when your vacuum is running properly. However, if your Dyson DC25 vacuum no longer picking up dirt and dust, you may be wondering what to do. We studied professional ideas for a vacuum that is not picking up, so don’t worry. Instead, like an expert, learn how to deal with blockages and other issues that cause a vacuum to malfunction.

Don’t worry if your Dyson DC25 fails to remove particles from your flooring. Instead, consider the following steps to resolve the issue and return to cleaning your house: Unplug the vacuum cleaner, inspect the filter, and clean it if necessary to fix it.

What To Check If Your Dyson DC25 Not Picking Up

Examine The Roller

The first place you should search for a reason for why your Dyson isn’t picking up dirt is the roller. If the motor is still working, but your vacuum isn’t picking up anything, this is the most probable cause. Before you begin the check, ensure your vacuum is disconnected, just as with any other electrical item.

Turn the machine over to get a closer look at the roller. String, cotton, and hair should not be present on an operating roller. This section frequently gathers a lot of junk after many cleaning sessions and becomes blocked as a consequence. If someone in your family has long hair, you have carpets with edgings, or you have pets, there’s a good risk that something will wrap around the roller of your vacuum cleaner.

As hair and thread accumulate, the vacuum’s performance deteriorates, ceasing to function as intended. To re-establish the old suction force, remove any hair that has been entangled in the roller. A plate around the roller will simply come out if the screws are removed. So even though some Dyson vacuums have three larger crews to hold this plate, it takes merely a quarter turn to remove it.

See also  Dyson Hose Not Working? Solved!

If you remove this plate, you’ll have easier access to the brushes and roller. Because the plate is kept in place by a rubber belt and is difficult to retrofit properly, it is not suggested to remove it entirely. If you see a damaged belt, replace it immediately. However, if the rubber belt is undamaged, it is best to leave it alone.

Cut any cotton or hair trapped in the roller with a pair of scissors. It may take several minutes to remove everything thoroughly. Before reinstalling the guard, double-check that everything is in order.

Examine The Hose

Blockages in the hose are a typical cause of a Dyson vacuum not picking up. Remove the suction hose from the intake on a canister type and verify the suction coming out of it. If the intake still has significant suction, the obstruction must be in the extension wand or the suction hose.

Remove the extension wand and hold it to the light to see what’s inside. The barrier is located here if your vision is entirely or partly impeded. If you can see the light, the obstruction is most likely in the suction hose. Pull the impediments out of the hose or wand using a wire hanger.

Remove the transparent bin from your Dyson DC25. Please turn it on and use your palm to feel the suction coming from the exhaust. Check the cleaning tool and cleaning head for obstructions if it’s stronger than the suction from the floor cleaning head.

Remove any clogs you notice, such as dirt or hair that has blocked the cleaning head. To get rid of the filth that has gathered within the head, use a clothes hanger, particularly on the uppermost shelf. While vacuuming, this region tends to collect a lot of debris, which might result in diminished suction.

Examine The U-bend Pipe

The connection hose is connected to the dust cup via a U-bend pipe at the rear of several Dyson vacuum models. With a quarter-turn screw, this pipe is secured in place.

Some of them are translucent, so you can tell whether they’re obstructed without having to remove them. However, if your model’s pipe is opaque, remove it and blow it into one end to check for obstructions. To repair your Dyson DC25 with no suction, clean the pipe before reinstalling it in your vacuum cleaner.

See also  Dyson Not Charging Flashing Red Light? Do This Now!

Examine The Side Valve

On the side of your Dyson vacuum, there might be a valve. First, push a button beside it to remove it from the machine. Then, blow into one end to check if any obstructions exist. The valve must be cleaned if you can’t feel the air coming out of the other end.

Examine The Bristles

While vacuum cleaner bristles are usually sharp at first, they wear down with time, especially if your vacuum is many years old. So make sure your Dyson DC25 appears like a fresh toothbrush if it’s lost suction. If not, the brush bar may need to be replaced entirely.

Check The Bin

Ensure that the dirt bin on your Dyson DC25 vacuum has been emptied. This may not occur to you, but it is a typical cause of your Dyson vacuum not picking up dirt.

When cleaning with your Dyson vacuum, keep an eye on the transparent bin to observe how much dirt and debris has accumulated and when it’s time to empty it.

A totally or almost full bin leaves little room for extra dirt, weakening the vacuum’s suction and causing your Dyson to stop picking up dirt. After that, the air will be channeled to a tiny vent above the filter, which may produce a loud hiss.

Push the release lever on the hand and remove the transparent container to empty it. A red latch may be seen at the bottom of the bin. Hold it down, empty the dirt bin, and slide it off the machine. While you’re doing it, be sure to inspect the seals for any damage.

Examine The Nozzle

If you have a Dyson portable vacuum, check the nozzle for any blockages or obstructions that might cause the vacuum not to pick up dirt. This simple test may restore functionality to your Dyson DC25 if it has lost suction.

How Do You Adjust Suction On A Dyson Vacuum?

You’ll need to make modifications for the best results depending on the kind of surface you’re cleaning with a Dyson vacuum. For example, consider adjusting the level to fit the carpet pile or the bare floor. 

See also  Dyson Not Picking Up? Avoid This!

Increase or decrease the suction as required. Make sure your Dyson has no obstructions and that the filter is clean. Your vacuum’s level setting influences performance, so be cautious not to set it too low or too high depending on the surface.

How Do I Know If My Dyson Ball Is Clogged?

A Dyson will likely inform its owner when a blockage is present by turning on lights, emitting burning or chemical odors, or making loud sounds. Because the suction is restricted, the pitch of a clogged Dyson Ball may alter. The revolving brush may struggle to turn. There may be little to no suction at the end of the hose or nozzle attachment.

Is It Normal For A Dyson Vacuum To Get Hot?

The machine will heat up after a long day of cleaning with a Dyson vacuum. Thankfully, most Dyson vacuums include a safety feature that immediately shuts off the unit if it overheats. Running a heated vacuum is risky since it may create long-term problems, poor performance, and diminish the vacuum’s lifespan.

Vacuums will grow heated if there is an obstruction, the airflow is blocked, or the motor is malfunctioning. Give the Dyson a rest and inspect if it emits terrible scents of burning, chemicals, or sounds like it is trying to pick up. Allow your Dyson to cool down for around 45 minutes after each usage.

Do Dyson Filters Need To Be Replaced?

A Dyson filter may need to be replaced more often in homes with much foot activity and dirt to clean. A filter should be changed once a year and cleaned regularly. Be aware that certain Dyson vacuums may only come with one filter. For a vacuum to work properly, all filters within the device must be clean and free of obstructions or debris.

Do not use any detergents for cleaning filters; instead, use just cold water. Allow 24 hours for vacuum filters to thoroughly dry before replacing them to avoid electric shock, damage, or malfunction.

How Long Should A Dyson Vacuum Last?

Purchasing a Dyson vacuum cleaner is an excellent method to keep your house and other areas clean. A Dyson should last 7 to 10 years if cared for properly and cleaned and maintained regularly. A good vacuum cleaner may last up to almost 20 years if you’re fortunate.

Filters may need to be cleaned and changed regularly during the machine’s lifetime. Also, pay close attention to the belt, motor, and spinning brush, since these are all critical to the appliance’s operation.

Conclusion On Dyson DC25 Not Picking Up

A Dyson DC25 vacuum that isn’t picking up isn’t uncommon, but due to these Dyson vacuum troubleshooting methods, you can usually find out what’s wrong and repair it yourself. Remember to keep your vacuum clean regularly to avoid problems like these in the future.