Dyson Not Picking Up? Avoid This!

Is your Dyson Not Picking Up? And you are wondering what could be the problem. All vacuum cleaners eventually stop cleaning up dirt, and this is simply because they must be maintained and cared for regularly. Vacuum cleaners require some maintenance due to the dust, hair, cotton strands, and fluff, and Dyson vacuum cleaners are relatively user-friendly regarding care.

If your Dyson Vacuum isn’t picking up dirt after a while, it’s likely in need of some cleaning. Because the vacuum is such an essential part of your cleaning process, keeping it clean is important. However, picking up dirt may have collected some land that needs to be cleaned up.

In most circumstances, the correction can be completed at home, eliminating the need to take the machine to a repair shop. The vacuum stops taking up dirt when it becomes clogged with too much ground. Before running out, try a few things at home to save time and money.

Is Your Dyson Having Trouble Sucking Up Dirt?

At some time, all vacuums and hoovers will quit sucking up dirt. You should do a few basic actions to ensure that your Dyson operates effectively. These things should be done regularly once a month but we only do them when we realize the hair and fluff have lingered on the rug.

Before taking your machine to a repair shop, consider cleaning the roller and filters to see if you can save time and money by doing it yourself. You’ll be astonished at how successfully these seemingly insignificant details can work. You’ll find out how to do it in the sections below.

What should I Do If My Dyson Is Not Sucking Dirt

Below are things to do when your dyson isn’t sucking up dirt.

See also  Dyson V6 Not Charging? Fixed!

Examine The Roller

When your Dyson quits taking up dirt, the first place to examine is the roller. If the engine is still running and the suction appears fine, the roller could be to blame.

Unplug And Turn Upside Down

Before working, ensure your cleaner is wholly unplugged and turned upside down. Hair, cotton, and thread should be kept out of the roller, but it will become clogged after a time if it is used frequently. If you have pets, carpets with edgings, or family members with long hair, there’s a reasonable risk that something will be wrapped firmly around the roller’s entire length. The vacuum cleaner will not be able to perform as efficiently as it should as this builds up, and the roller will not turn properly. Therefore it must be cleaned carefully.

Remove The Plate Around The Roller

A plate will surround a portion of the roller and can typically be removed by releasing a few screws. There are three massive screws on this Dyson model that undo with a quarter turn, and then the plate comes off. If the Plate is removed, you can get a better view of the roller and brushes. I wouldn’t recommend entirely removing the roller because it’s held in place by a tight rubber belt that’s difficult to replace. The strap can be replaced if it breaks, but if it isn’t, I would leave it alone and spare yourself a lot of trouble.

Cut And Pull Out The Hair Stuck In The Roller

Cut the hair and cotton caught in the roller with regular scissors and pull it all out. It will take a few minutes to clean it thoroughly, but ensure it is clear before reinstalling the guard for the most incredible effects.

Clean Your Dyson Filters  

After cleaning the roller and brushes, the next step is to inspect the filters. Most vacuum cleaners have at least one filter that must be cleaned since it will become clogged with dust and stop sucking effectively. Some filters will need to be thrown out and replaced with fresh ones, but the Dyson range includes reusable filters. Before placing them back in place, they must be cleaned and dried.

Reusable Filters: How To Remove And Clean Them

There are two filters in my model. One is located beneath the dust barrel/bag, while the other is located next to it. Once you know where they are, they are simple to eliminate. Wash these filters in hot water with a bit of soap once removed from the vacuum cleaner. The water will typically be dirty, but it should be clear once the filter is cleaned.

See also  Dyson DC25 Not Picking Up? Avoid This!

Before reinstalling the filters, make sure they have thoroughly dried overnight. Dyson filters are made up of numerous layers and must be completely dry. The combination of electricity and water is extremely harmful.

Examine The U-Bend Pipe

This pipe can be found at the back of your cleaner and is detachable. This pipe is transparent in a handful of the later models.Pull out the pipe in your model and blow on one end if it’s opaque. By breathing into the device, you may determine whether it is clean or not.

The U-bend pipe can also be translucent in some variants. You don’t even have to take it out to check it here. It would be best to reconnect the U-bend pipe to the vacuum cleaner once it has been cleaned.

Examine The Side Valve

The side valve is positioned on the machine’s side. You can detach it from the primary device by pressing a button. Blow on one side after disconnecting the valve.If you can feel the air going out the other side, that’s wonderful; if you can’t, this valve needs to be cleaned.

Examine The Bristles

You should inspect the bristles to see if your vacuum cleaner isn’t taking up anything. The hairs are usually sharp. However, they begin to wear out over time. It would be best if you kept them looking like new toothbrushes. Your work will be slowed if your equipment does not have clean bristles.

Examine The Bin

Checking the garbage is another thing you should do to ensure that your cleaner is working correctly. Your vacuum cleaner has a bin attached to the vacuum-like pouch. It includes multiple lock systems that make it simple to operate. It would be best to double-check that all locks are in working order. So the best option is to disconnect it and reconnect the bin section.

Examine The Hose

Sift through the external hose for any clogs or obstructions that could impair the vacuum’s suction. It would be best if you also inspected the internal hose while you’re at it. If there is any dirt, you will have the opportunity to clean it.

See also  Dyson DC33 Not Picking? Solved!

Examine The Base

Remove the transparent bin and inspect the inspection port lid on the base of your vacuum. If any clogs need to be removed, do so. Remove the red internal hose collar for inspection as well. If there’s any debris or a clog, get rid of it.

Examine The Base Cleaner 

Remove the base plate to access the airflow and see whether the cleaner head is causing an issue. To begin, remove a ‘C’ clip from the cleaner head. Place the cleaner head on its back after turning the cleaner head dials until they click. Raise the top of the base plate, rotate it, and then remove it.

After it’s out, you can see whether there’s any obstruction that needs to be cleaned in this location. To ensure that your vacuum cleaner functions correctly, provide all the parts are clean and that any old parts are replaced as needed.

It is far less expensive to replace parts than to purchase a new cleaner, so it is well worth the investment.

Why Isn’t My Dyson Vacuum Picking Up?

The filter may be dirty if the machine no longer sucks up objects efficiently. If your vacuum isn’t removing debris after cleaning the filter, flip it around and pull the red tab at the bottom of your Dyson out.

Why Isn’t My Dyson Cordless Vacuum Picking Up?

If a filter on your Dyson vacuum becomes clogged due to not cleaning it regularly, the vacuum may stop working. Make sure your vacuum’s filters are clean and clear of debris. The filter should be cleaned.

Dyson Maintenance 

These simple tasks should be completed monthly to keep your vacuum cleaner’s suction power. If you do it regularly, it should only take you 10 minutes. At the very least, you should do these things as soon as you notice that your appliance isn’t performing as well as it once did.

After a few years, replace the filters. To keep the Dyson running smoothly, you should replace the filters after a few years of use. Genuine parts are worth investing in, even if they are more expensive because they fit properly and last much longer. When I recently replaced my cleaner, it was noticeably better. It is much cheaper than purchasing a brand new vacuum cleaner.

Conclusion On Is your Dyson Not Picking Up?

And you are wondering what could be the problem. All vacuum cleaners eventually stop cleaning up dirt, and this is simply because they must be maintained and cared for regularly.

A Dyson vacuum that isn’t picking isn’t uncommon, but with these Dyson vacuum troubleshooting methods, you can usually figure out what’s wrong and fix it yourself. Remember to keep your vacuum cleaner regularly to avoid problems like these in the future.