It feels frustrating when Roomba Buttons not working. Imagine not being able to control your Romba? Roomba is a clever robot that cleans your floors by traveling around your home. It’s simple to set it up; all you have to do is completely map your home, which can take up to four hours, depending on its size. Then, using the mobile app, choose which places you want it to clean, and you’re done.
Dirt and battery issues can make the Roomba button stop working. Check the batteries for problems, power cycle or reset your Roomba, wipe the dust out of your Roomba, clean its electrical contacts and filter if your Roomba button is not working.
Why Is My Roomba Button Not Working
My Roomba button stopped working one day. Nothing happened when I kept pressing it. I was fortunate to have a lot of free time on that particular day. As a result, I did my due diligence and found a solution. So many things can cause your Roomba button not to work; the button might be bad, dusty, and have power cycle issues.
What to Do If Your Roomba’s Button Isn’t Working?
Some users have reported having problems getting their Roomba’s clean button to work. Here are a few possible solutions for you to try to solve this issue.
Clean Your Roomba
Mechanical or touch buttons will be available depending on the model you purchase. Some dirt likely got trapped behind the button if it has mechanical buttons and you’re having difficulties getting them to work.
To remove the dirt preventing the button press from registering, use a vacuum or a blower. Your button should then start working properly.
Keep The Button Pressed
Another option is to press and hold the clean button for about 15 seconds before releasing it. A beep will sound, and a white LED indicator will light up. After that, wait for your device to boot up, and then use the Clean button to see if that resolves the issue.
Examine The Batteries
Faulty or depleted batteries are the most likely source of this error. You must ensure that the LED indications light up after pressing the clean button. You’ll see a green or white light depending on your model. If the light on your Roomba does not turn on, try charging it again or replacing the batteries.
After replacing the batteries, use the clean button to see if the indicators light up. If they don’t, something is wrong with the internal circuits, and you’ll need to take your Roomba to a repair center.
Power Cycle Your Roomba
Turning a piece of equipment off and on again is known as power cycling. When anything stops operating, we commonly use this approach of restarting. Here, we use the same method.
Remove the power supply from the Roomba to turn it off. Please wait a few seconds, say 30, before turning it back on. This seems to have worked for many people, so who knows, it could work for you as well.
Reset The Roomba
The reset option erases all data and restores the system to its default settings. You can resolve the issue with the clean button by resetting the device.
The procedure is straightforward. To begin, make sure the Roomba is turned on by checking the LED indications. Then, for around 10 seconds, press and hold the Spot and Dock buttons simultaneously. The lights will turn off automatically, and a beep sound will indicate that the reset is complete.
The device charged the Roomba before hard resetting it. Place the robot on its home base or connect the charger to the robot directly.
Next, hold the Clean button until the wee blue text ‘r 5Y’ appears on the screen. After that, press and hold the Clean button until a beep sound is heard. As a result, the reset process is finished.
Clean Dust Out Of Your Roomba
No matter what job it serves, every piece of equipment must be cleaned. Similarly, it would help if you cleaned your cleaning gadget. The cleaning procedure will differ according to the model, such as whether it has mechanical or touch keys.
If dirt is trapped inside the Clean button, mechanical buttons will have a hard time registering it when you press it. Vacuuming and dusting will suffice to remove this.
Aside from that, a few sections of your Roomba need to be cleaned. To begin, remove the tray that holds all of the trash by clicking the button on top of it and removing it. While you’re at it, clean the filter as well. To clean it, use a vacuum cleaner with a brush attached to the suction hose.
Remove the side sweeper (the circular component on the top left side of your Roomba) and clear the debris away. Remove the front wheel and the brush and bearings, and clean them. Similarly, disassemble any parts that you can remove and thoroughly clean. After that, put your Roomba back together.
Remove The Roomba Filter And Clean
Even if you don’t use your Roomba very often, you should always check the filters before each cleaning cycle because they can become clothed. This could cause the robot to overheat.
As a result, its performance suffers. Remove the dust from the wall and empty the contents. Remove the filter before reinstalling it. The method for removing filters varies between iRobot generations. You can tap the filter against the trash can to remove the debris. You can also clean the filter with compressed air.
Clean The Roomba’s Electrical Contacts
It’s possible that if you don’t clean your Roomba’s electrical contacts, it won’t charge or dock properly. Because you’re working with electrical contacts, you must use the utmost caution.
Cleaning the charging contacts of the Roomba with a damp melamine form or a dry cloth is usually recommended. Turn your Roomba on its side and gently wipe the contacts. Do the same thing for your home base. I had to work hard to remove the gunk, but everything was crystal clear once I did.
Contact Your Customer Care
Contact customer service if none of the previous techniques seem to work. Some things are out of our hands. There’s just so much one person can do. You may phone a toll-free number or send an email to customer service, and they’ll call you back.
Make sure you include the right model and brand number. Then go through the problem in depth. The highly skilled personnel will undoubtedly lead you through each stage.
How To Reset A Roomba Vacuum
Your Roomba will be powered off and then re-powered when you reboot it. If your Roomba isn’t connected to Wi-Fi or has some other issue, it’s necessary to reset it. Your Roomba’s companion app data (logins, stored maps, and user preferences) will be accessible once you reset your robot vacuum.
You may need to execute a complete factory reset of your Roomba if you want to get rid of it or if you’re experiencing some deeper-seated difficulties that a simple reboot won’t fix. This procedure will effectively reset your Roomba to its factory settings and delete all user data from the bot and companion app.
The technique for rebooting and factory resetting your Roomba will differ depending on the model. The following is a step-by-step tutorial on resetting each Roomba model.
Series S And I Roomba
For roughly 20 seconds, press and hold the Roomba’s Clean button. The light ring surrounding the bin lid will flash white when you release the button, indicating that the reset was successful. The reset is complete only when the light ring stops shining, which might take up to a minute and a half.
Roomba 500, 600, 700, 800, and 900
For roughly 10 seconds, press and hold the Roomba’s Clean button. The Roomba will emit a chime once you release the button, signaling that the bot has been reset.
How Do I Get My Roomba Back Online?
If you’ve misplaced your Roomba and can’t locate it, use the app to call it. You’ll be able to monitor it after that. On your phone, go to the iRobot HOME App and tap the three dots in the bottom right corner. On the following screen, press the find button. Your Roomba will begin to play a melody, which you can identify.
How Do I Set My Roomba Map?
Make sure your Roomba is plugged in, the power button is pressed, and the home screen displays “Setup” after pressing the mode button if you want it to map out your house. Setup may be found on the Home Screen. After that, you’ll be asked to choose a room and begin mapping.
Conclusion On Roomba Buttons Not Working
Roomba is an intelligent robot that cleans your floors by traveling around your home. It’s simple to set it up; you must thoroughly map your home, which may take up to four hours, depending on its size. Then, using the mobile app, choose which places you want it to clean, and you’re done. Some customers have reported having problems getting their Roomba’s clean button to operate. This article listed 10 ways to solve the “Roomba button not working.”