Roomba E5 Not Charging? Fixed!

Is your Roomba E5 not charging? Is your Roomba’s indication light not turned on? Or does it light up, but the device won’t move when you try to clean it? Likely, your Roomba isn’t charging properly. This can happen to any robot vacuum regularly. What’s the deal with your Roomba not charging? The most common cause of your Roomba not charging is dirty charging contacts.

To charge the Roomba, the robot’s charging contacts and the Home Base must make a clean connection. To fix the problem, wipe the charging contacts with a dry cloth.

Reasons Why My Roomba E5 Not Charging?

Roomba won’t charge if its contact points are filthy or not touching; this is caused by too much dirt, dust, or grease deposited on the charging points and caster wheel. 

It could also be caused by a broken power outlet, an incorrectly installed battery, or software issues. It could be due to a temperature mistake in some circumstances.

Clean charging contact points if your Roomba won’t charge

Small metal strips on your unit are called contact points. Two are on the bottom of your Roomba, and two are on the docking station. These metal strips handle the charging and connection of your Roomba to its Home Base.

In essence, it is a conduit for power charges. So, if it’s covered in dirt, dust, or gunk, electricity won’t flow. Cleaning the contact points on your Roomba and the Home Base, on the other hand, will allow your unit to charge effectively. To clean it, wipe away any dirt that has accumulated. 

Here are some examples of what you can do:

  • Cloth made of microfiber.
  • Rubbing alcohol and a soft, dry towel
  • Magic Eraser or damp melamine foam

These materials will aid in the removal of sticky gunk that is difficult to remove with just water. In addition, the contact points will not be damaged.

See also  Roomba Not Connecting To Cloud? Avoid This!

Before cleaning the Home Base’s contact points, disconnect them first. You won’t experience electric shocks when cleaning this way.

Wipe the charging points on your Roomba and its Home Base with any of these materials. Allow a few seconds for it to dry before recharging your device.

Your Roomba’s contact points are continually exposed to dirt and dust. So make sure to clean it once in a while to avoid similar problems from recurring.

Change the outlet where the unit is plugged in

If your Roomba is plugged into a malfunctioning power outlet, it may not charge. “How can I tell if the power outlet is broken?” If you have an outlet tester, you can use it to check if your outlet is working.

If this does not work, try plugging your Roomba Home Base onto a different outlet. The Home Base’s indicator light should illuminate if the outlet is operational. “I checked the outlet, and it’s working. “Why isn’t my Roomba charging?” you might wonder.

It’s most likely because the machine isn’t receiving enough power from that particular power source. There may be some wiring difficulties with it.

Restart the Roomba

If the contact points and power source aren’t the problems, the unit could be the source of the problem.

Some software bugs may affect your Roomba. These are computer errors that cause systems to produce incorrect results.

Software bugs, in simple terms, cause your Roomba to malfunction or crash. If you notice the unit’s indicator light is on but isn’t charging, it could be due to a software bug.

“What am I supposed to do?” “Should I make a replacement call?” No, not at this time. Sure, software bugs are inconvenient. It can, however, be readily solved by hard resetting or rebooting.

It’s simple to restart a Roomba. It would, however, depend on the Series you’re using. Here’s how to bring Roomba back to life based on its Series:

  • Press the “Clean” button for 20 seconds on the s and I Series. Wait for the light ring to turn off before releasing. It will take approximately 1.5 minutes to accomplish this task.
  • Press the “Clean” button for 10 seconds for the 700, 800, and Series. Wait until you hear a reboot tone before releasing.

Roomba’s software will be reset, and temporary data will be deleted if you reboot it. It will not, however, delete your scheduling information or smart mapping.

See also  Roomba I7 Not Connecting To Cloud? Answered!

Factory Reset The Unit

If rebooting the unit software or the battery doesn’t fix the problem, it’s time to factory reset the device.Unlike rebooting, factory resetting wipes out all of your data and settings.

This includes your cleaning schedule and home mapping. In other words, it resets your device to its factory settings.

Tip: If you’re sure you want to factory reset your device, make a backup of your data first.

You can factory reset your Roomba in one of two ways. Either through the iRobot Home app or directly from the unit. Using the iRobot Home App, factory reset Roomba:

  • Navigate to the iRobot Home App.
  • Select “Settings” from the drop-down menu.
  • “Remove/Factory Reset” is the option to choose.
  • After that, click on your unit’s robot name.
  • The Series of your Roomba unit should be considered when factory resetting it.

Based on the Roomba’s Series, here’s how to factory reset it:

For E series

Press the “Home,” “Spot Clean,” and “Clean” buttons all at once. Hold it for about 20 seconds. Then, release.

For 900 series

Press the “Dock,” “Spot Clean,” and “Clean” buttons all at once. Hold it until all the button indicator lights turn on.

For Roomba combo

Open the unit lid and locate the “Reset” button. Press and hold the reset button for 10 seconds.

Restart the Roomba Battery

It’s not always your Roomba software that needs to be reset. Your Roomba battery, on the other hand.

Resetting the battery refreshes its system in the same way that software does. It will be able to improve its performance and function.

If your Roomba battery is quickly draining, you might also want to try resetting it.

If you want, you can purchase a replacement. Resetting its battery, on the other hand, will save you money. Not to mention that it extends the life of the battery.

What are the signs that my Roomba battery needs to be replaced?

When your Roomba battery starts to drain too quickly, it’s time to replace it. If the battery indicator light does not illuminate or the unit does not hold a charge, your Roomba battery needs to be replaced immediately.

See also  Roomba Not Vacuuming? Avoid This!

Batteries, like electronics, have a limited lifespan. The battery in Roomba robot vacuums can last up to 2-3 years on average. It can last up to 6 years with proper maintenance and moderate use.

This means your Roomba can run for hundreds of cycles. Although the battery can be reset, some issues can only be resolved by replacing the battery. So, how do you know if the battery in your device needs to be replaced soon?

  • If you haven’t done so already, replace your Roomba battery.
  • It disappears in a flash.
  • Its indicator light is broken or not working at all.
  • Even after trying several fixes, if the unit still won’t charge,
  • The issue is not resolved by resetting or deep charging the battery.
  • After 15-20 minutes of cleaning, it comes to a halt or docks.

Age of your Roomba machine

In September of 2002, the first Roomba was released. It’s been nearly two decades since then.

The units have undergone numerous modifications throughout the years. More advanced features and better system designs have been observed in newer models.

However, it’s only natural for older units to show wear and tear. If you’ve had your Roomba for a long time, it’s possible that replacing the battery is the best solution.

It’s undoubtedly done hundreds of cleaning cycles and is towards the end of its battery’s life. However, if you’re using an extremely old model from the first few series, it’s best to purchase a replacement.

Because the battery compartment is likely to get worn out as well, it’s possible that even fresh batteries won’t be able to keep up.

The Roomba Won’t Turn On

When the power button is pressed, the Roomba does not respond. The battery hasn’t been charged.

If the Roomba’s red light flashes and the phrase “Low battery” appears on the screen, you’ll need to connect it to the home base. 

Make that the battery indicator on the Roomba is pulsing and the power indicator on the home base is blinking green.  The battery indicator will remain solid green if the Roomba is fully charged.

Conclusion On Roomba E5 Not Charging

When your Roomba doesn’t charge, check to see whether the Home Base is powered on or if there is any dust on the charging contacts.

Using the wrong type of battery or having a problem with the power source can cause your robot not to switch on or charge.

That’s all there is to it. The solution to the puzzle of why my Roomba isn’t charging. Do you see how simple the solution is? 

Your Roomba should be in excellent working order with only two simple steps. You are now well-versed in keeping your Roomba in good working order and ensuring its longevity.