Is your Roomba not cleaning rooms? You got your Roomba to help you with cleaning, yet you still have issues cleaning. Cleaning can be quite troublesome and take a lot of your time. The time you spend cleaning can be used much more productively, but the thing is, you can’t live in a dirty house. So what’s the solution then? Cleaning robots, also known as Roomba, can help you clean your home quite easily. You have to clean its dirt compartment once a day, and you are all set. Some Roomba even come with a self-cleaning compartment, providing extra convenience. They are not as expensive and save a lot of your time.
Inadequate light can make Roomba unable to clean rooms; in a dark room, Roomba has difficulty navigating. The Roomba’s navigation across all rooms may be hampered by the camera attached.
Common Reasons Why Roomba Does Not Clean the Room
Working with technology might make your life easier in specific ways, but it can also require a few extra steps before you can completely rest and let the machine do everything.
Many owners of the Roomba robot vacuum have claimed that once these small issues were resolved, hand-cleaning the floors became a thing of the past! So let’s look at how to fix this problem on each model so you can relax and watch your Roomba do its thing.
If you have a free day and can keep an eye on it, run its whole-house cleaning routine and see where the battery is as it moves from room to room. It’s time to change the battery if you notice it’s getting too low before it’s finished.
Fortunately, you can replace your battery by ordering a brand new one and installing it at a very low cost. If it’s not the battery, take a look at these other possibilities:
Roomba Should Be Updated
Your Roomba may require an upgrade from time to time. When Roombas are docked, they are programmed to update themselves automatically.
We all know how that goes, though. Automatic updates don’t always meet the definition of “automatic” for whatever reason.
Turn Off The Settings For Your Virtual Wall
You might have previously created a virtual barrier to keep the Roomba out of a specific room or area. You’ll want to go back into those settings and turn off the virtual walls if you change your mind.
Reset Your Map Preferences
Begin by cleaning the slate and starting over with the map configurations you’ve already created.
Holding down the “Clean” button for at least 20 seconds until the Roomba lights go dark and it restarts will quickly and easily reset your Roomba.
The Sensors On Your Roomba Should Be Cleaned
On the Roomba, various sensors should be cleaned regularly. It would help if you concentrated on the cliff and dirt sensors.
There are at least 5 or 6 cliff sensors, each designed to detect a potential fall, such as a set of stairs. If they become too filthy, your Roomba may begin to regard anything as a potential hazard.
Use A Clean Cloth To Wipe Down Each One
Use a clean cloth to wipe the sensors on your Roomba. The cloth can be sprayed with rubbing alcohol. Dirt sensors are located on the lower front section of the Roomba and are self-explanatory.
If the sensors become too dirty, they will either presume that they are full of dirt or stop picking up ground on the floor entirely. Use the steps below to clean the dirty sensors.
- Remove the trash can
- Make use of a fresh cloth.
- Apply a tiny amount of rubbing alcohol to the area.
- Both sensors should be cleaned entirely.
Once the sensors have been cleaned, the Roomba should return to normal and begin picking up dirt again, as well as no longer believing it is stuck on the edge of a stairwell.
Obstacles In The House
When you first turn on your Roomba and set it to “Clean All,” it will work through your house, mapping out its new surroundings as it goes.
If any temporary items are in the way, such as a sock on the floor, your Roomba will go around it instead of mapping the area.
Inadequate Lighting
Some Roomba models, such as the 960 and 980, require adequate lighting to map the space correctly.
As a result, you’ll need appropriate lighting when your Roomba runs through for the first time to guarantee that each room is mapped correctly.
5 Simple Ways to Make Roomba Clean the Whole House
Nothing is more aggravating than turning on your Roomba and leaving it to clean your house, only to return to find piles of dust and debris on the floor of specific rooms!
Follow these simple steps if your Roomba is skipping rooms:
Make Sure “Clean All” Is Selected
Innovative Maps are included with the Roomba I and S series models. These maps allow you to personalize your cleanings by omitting certain rooms and focusing on others.
However, if you have a customized map turned on, your Roomba may be unable to clean the entire house. If you’re having trouble, open the iRobot Home app and select “Clean All” as your cleaning preference. The Roomba will attempt to clean the house with this simple command.
Ensure that your Roomba is linked to your home’s Wi-Fi network.
Before A Cleaning Session Empty The Trash Can
Your Roomba’s dustbin may be full if it’s not cleaning the entire house, but it still has some battery life. Your Roomba will stop cleaning when its dustbin is complete, just like a regular vacuum, because the device can’t hold any more dirt in its container.
Newer Roomba models come with their Home Base, allowing them to empty their dustbin automatically. All you have to do is regularly empty the trash from its Home Base.
Check To See If Your Roomba Is Fully Charged
If you power your Roomba with a Home Base, it will automatically recharge after each cleaning session. The Roomba will be ready for a cleaning run if it is permanently docked.
If your Roomba doesn’t come with a Home Base, you’ll have to charge it manually.
As long as your Roomba’s battery is fully charged, it should be able to clean the entire house in the time allotted. Keep in mind, though, that if your home is large, your Roomba may require a few changes in between sessions.
You can find out how long it takes a Roomba to clean a house by clicking here.
Remove Impediments From Your Home’s Layout By Reacting To Them
If you’ve tried everything above and still can’t get your Roomba to clean the full house, the best plan of action is to remap your home while removing obstructions.
Edge Cleaning” Should Be Enabled
On all Roomba models, “Edge Cleaning” is turned on by default. This option guarantees that your walls’ edges and furniture, such as kitchen islands or sofas, are properly cleaned.
Your Roomba might be avoiding the edges of walls and furniture if you turned off “Edge Cleaning” at any point in the past. Because dust and grime tend to collect in the corners and edges of your iRobot Home app, it’s critical to turn this setting on.
What Is The Best Way For Me To Tell My Roomba Which Rooms And Zones To Clean?
You can tell your iRobot Roomba when and where to clean using the Home app, so you don’t have to think about it.
Roomba’s instructions for designating certain rooms and zones:
- For a few seconds, press and hold the Roomba icon.
- Select the “Room” section, which is located between the two main instructions.
- On the next screen, you can select whether you want all of your rooms cleaned or just a few.
- Select the desired rooms and zones, return to the upper left corner with the arrow and start your Roomba.
Please note that if you wish to clean only specific areas, you must first configure your rooms and zones in the iRobot app. You can also let Roomba clean the entire area that your Roomba can reach if you haven’t defined any rooms or zones yet.
What Should You Do If Your Roomba Misses Spots While Cleaning?
They aren’t perfect, even though they are amazing little machines. When there are too many obstacles in a room, the Roomba may begin to run around in circles instead of producing a thorough clean.
To solve this problem, you may need to rearrange a few things to give your Roomba a more open floor plan.
It would help if you also increased the brightness of the lights so that the camera can see everything in its path. (Except for the i3, which relies solely on sensors to navigate in the dark.)
If those alternatives don’t work or you’re not home, you may use your iRobot app to direct the Roomba to a specific cleaning location, but you may have to repeat the process if it can’t figure out how to get there on its own.
Conclusion On Roomba Not Cleaning Rooms
Roomba, like any other electronic device, isn’t perfect, and even the best initial setup can degrade significantly as the battery life diminishes and the sensors become clogged. The importance of preventative maintenance cannot be overstated.
Once a week or so, sit down and go over your Roomba, cleaning the sensors and double-checking your settings. If you follow the troubleshooting steps above, you should be able to resolve the mapping issue and get your Roomba back on track.